Vinegar Powered Battery
TOOLS:
drill
soldering iron
hot glue gun
pliers
knife
SUPPIES:
wire
sealed pill bottle
zinc
carbon rod (i got my cabon from a old battery)
drill
soldering iron
hot glue gun
pliers
knife
SUPPIES:
wire
sealed pill bottle
zinc
carbon rod (i got my cabon from a old battery)
Step One (connecting)
first you want to connect the wires to your electrodes (the carbon and zinc) for the zinc you can solder the wire on and for the carbon you will have to use hot glue. after you have connected the wires use the hot glue and cover all the solder and bared wire for the best performance
Step 2 (placing)
now you want to put the two electrodes on the oppisite sides of the pill bottle and hot glueing them in place
Step 3 (finishing Touches)
drill a hole in the top of the pill bottle and pull the wires though but leave about 3-4 inches of wire between the bottle and the cap then hot glue seal the wires in place. fill it half full of vinegar and try it out