Replacing Front Axle Bearings on 1920-23 Model T

this instructable will show you how to clean front axle bearings on a model T

screw off hubcap

take out cotter pin and screw off castellated nut with washer. screw off the piece that keeps the bearings in. take wheel off with bearings still in place.

take all 11 bearings out. wipe grease out of the rim and with a dremel and wire brush try to take out dents in the wheel. after doing so clean bearings with a paper towel

clean all grease off axle. put new axle grease back on axle.

put wheel back on axle and re-grease bearings and wheel then put bearings back in the wheel.

put the piece that holds bearings in, washer, castellated nut, cotter pin and hub cap back on .