Lunchboxrc's Knex Gunbow
This is a gun that i have been desighning for a while. it is sort of like a cross between a knex gun and crossbow. it can shoot very fast and very hard will shoot 75-125ft. with 4 rubberbands. it has a 12 round magazine and fiber optic sight. There are two shooting modes a mag and a add on single shot barrel for increased accuracy and power. for the battle field or for faster shooting I reccomend using the mag because you can shoot it faster. But if you do target shooting then i reccomend using the barrel for its good accuracy and power. please leave comments. PS i am open to suggestions about this gun email me @ lunchboxrc95@aol.com Please leave NICE comments THX. Happy Shooting.
The Propulsion System
1. Biuld this
2. build this
3. Add #1 to # 2
2. build this
3. Add #1 to # 2
The Body
1. The body
2. The right side of the body
3. the mid sectoin
4. The right side
5. Build this and add it to the bottom of the body where the 2 white connectors stick out.
2. The right side of the body
3. the mid sectoin
4. The right side
5. Build this and add it to the bottom of the body where the 2 white connectors stick out.
The MAGAZINE
1. The MAG
2. side veiw of the MAG
2. side veiw of the MAG
The Handles
1. The front handle hooks on to the little black connectors on the side of th body.
2. the rear handle
2. the rear handle
Ram Rod and Pushrod
1. the ram
2. the pushrod
2. the pushrod
Extras
The single shot bolt action silencer!!!!!!!!!!!!!!!!!!!!
This is insane because there are 2 ways tto do this you can leave the barrel unconnected so it breaks away like a bullet shell or you can connect it for 50% better accuracy. can hit a penny from 10 ft. using the fiber optic sight. The bullet stays on course for 25 FT. plus
1.build this
2. add the bullet
3. connect to the gun
This is insane because there are 2 ways tto do this you can leave the barrel unconnected so it breaks away like a bullet shell or you can connect it for 50% better accuracy. can hit a penny from 10 ft. using the fiber optic sight. The bullet stays on course for 25 FT. plus
1.build this
2. add the bullet
3. connect to the gun
Adding Bands
1. add the two large rubberbands
2. another angle of step 1
3. add the smaller band here
4. the same as the other side
5. add a large rb to the MAG
6. add the littlest band to the trigger
2. another angle of step 1
3. add the smaller band here
4. the same as the other side
5. add a large rb to the MAG
6. add the littlest band to the trigger