Wooden Bluetooth Speaker

I will be demonstrating how to build a wooden speaker out of old computer speakers and wood.

The supplies that you will need are the following:

1. Old discarded piece of wood
2. Old speakers
3. Old Bluetooth mother board
4. wire
5. screws
6. lithium battery

The tools needed are the following:

1. Drill
2. Drill bit
3. sander
4. jigsaw
5. Hole saw
6. tape measurer
7. hand saw

First, gather all materials.

measure the wood to an appropriate size for the speakers.

Use the drill bit to drill pilot holes for the screws so that the wood doesn't crack and mess the wood you are using up.

Draw an outline of more or less where you want the speakers and the motherboard to go.

Cut the holes a little bit smaller so that the speakers can fit tight and not be loose.

Sand the box until you feel all surfaces to be smooth.

Make sure that when you are screwing in the speakers to be careful that you don't mess up the speakers.

Wire speakers according to the mother board. (+) with (+) and (-) with (-).

make sure to no get any wires stuck between the wood when putting it back together.