Wooden Show Stand

This is a Wooden Show Stand to put some small belongings on and maybe even a trophy.

Things you will need:

- wood that is at least 1 foot x 1 foot x .110 in - Laser Cutter - Any type of designing software - Hot glue (Or any glue for wood) - paint if you decide to paint yours

First thing you want to do is make multiple sides with indents of the material thickness(.110) in the center and the sides should be 5in x 2in (X2) and 3in x 2in (X2)

Next pick out your designs and set them up on each side how you want them.

Next Export your file as a DXF and cut the peices out

Look at them and see if they turned out how you wanted them, repeat steps 1 if they are not what your looking for.

Glue your peices together sides first then place the top piece on the top and secure it with glue.

Tada! You have made your wooden show stand and its ready to be painted or put to use right away.