Wildlife Monitoring System

by moekie in Outside > Backyard

108 Views, 0 Favorites, 0 Comments

Wildlife Monitoring System

WhatsApp Image 2024-06-17 at 07.42.08.jpeg
Lowie Soenens project one video

I made a homemade wildlife detection system.

Using materials I had at home.

For Project one (Project given by HOWEST)

In on the following link you will find a short video i made for this project:

https://youtu.be/ko5UViYOasE?si=ymaLxaQPAMkhIIEA

Supplies

Projectone-exel1.png
Project-one-excel2.png

The tools you will require are:

  • 3D printer
  • soldering iron
  • soldering tin
  • screwdrivers
  • Volt meter or Multimeter
  • (optional) Heat shrink tubing

For Supplies and cost (at time of making this) see attached files.

Making the Custom Dataset

Roboflow screen shot.png
anotate_proof.png
annotating.png

You can make your own free (at time of making) dataset on Roboflow by creating your own account.

You can visit the dataset I have made using the folowing link:

https://universe.roboflow.com/project-one-wildlife-monitoring-system/project-one-wildlife-system-lsden

Generating the AI

Aiscreen.png
training data.png

I generated my AI using YOLOv8.

But at time of release there will most likely be better models

Making the Camera Module

WhatsApp Image 2024-06-17 at 07.41.47 (2).jpeg
WhatsApp Image 2024-06-16 at 11.29.29 (1).jpeg
WhatsApp Image 2024-06-16 at 11.29.29.jpeg
WhatsApp Image 2024-06-11 at 10.10.41.jpeg
WhatsApp Image 2024-06-16 at 11.29.30.jpeg

For this you will need to get a casing (for waterproofnes) I used an Halogen floadlight.

A PIR sensor was used for power consumption reduction.


A battery so that you can power everything and place it in the wild.

For the battery it is also IMPORTANT that u use a voltage regulator

for regulating the correct voltage to the components.

(Make sure the raspberry pi gets 5.5V and the PIR 3.3V you can check this by using a Volt meter or Multimeter)

Of course i used a raspberry pi 5 to be able to send the footage to my computer via a network.


After this I took the correct measurements of the casing and the components

and made a fitting 3D print using a 3D printer for inside the casing.


The code I used for this part u can find in the folowing file (its in python).

Downloads

Making Server and LED/buzzer Part

WhatsApp Image 2024-06-17 at 07.41.47.jpeg
WhatsApp Image 2024-06-17 at 07.41.47 (1).jpeg

The biggest part of making the server part and LED/Buzzer part is the coding wich you can find in the following files:

Assembling

Then just assemble everything