Waterproof Rain Coat for Puppies

by WilliamD44 in Craft > Fashion

229 Views, 1 Favorites, 0 Comments

Waterproof Rain Coat for Puppies

IMG_0778.JPG
IMG_0772.JPG
IMG_0766 crop.JPG
IMG_0780 crop.JPG
IMG_0767.JPG
IMG_0775.JPG

Our new puppy 'Lucky' has been in our family now for three months and I have been taking him on morning walks everyday except for the days when it is raining. We live in the Tucson area and Monsoons have been rolling through our area and walking the puppy in pouring rain is never a good idea. I decided to use some of my left over waterproof Camouflage fabric to fashion him his own custome fit rain jacket.


Supplies

IMG_0738.JPG
IMG_0738 crop.JPG

Sewing machine

Water proof fabric

large sheet of paper

scissors

pen

tape measure

Seam ripper

sewing supplies (needles, thread, scissors)

The puppy as a model and to take measurements


Measure Your Puppy

IMG_0788.JPG
IMG_0737.JPG
IMG_0787.JPG
IMG_0743.JPG

Now getting a puppy to stay still enough is never gonna happen, but take your time, give lots of pets and treats and you should be able to get enough general measurements. I took the neck to tail, around the neck, around the chest, from mid back to the shoulder, mid back to the low hip area.

Draw and Cut Out Paper Pattern

IMG_0739.JPG
IMG_0740.JPG
IMG_0741.JPG
IMG_0742.JPG
IMG_0745.JPG
IMG_0744.JPG
IMG_0746.JPG

I roughly measured the back and then each hip and shoulder making sure that there would be enough fabric to go down to the legs. I made sure there was enough to over lap around the neck and chest. The tabs are where I will place the hook and loop fasteners for the neck and chest. I wanted more protection around the neck so I added a collar.

Cut out the paper pattern.

Cut Out Fabric With Pattern

IMG_0748.JPG
IMG_0747.JPG

With the selected fabric and your paper pattern, cut out each section of fabric.

Sew the Two Halves

IMG_0750.JPG
crop.JPG

Pin a section of the straight back to attach the two sides and then sew.

Sew the Collar

IMG_0751.JPG
IMG_0753.JPG
IMG_0752.JPG

I pinned the center section of the collar to the main seem of the back. Make sure the fabric is in the right side before sewing the curver collar to the neck area of the main body. I also folded over the edge and sewed an edge seam.

Sew the 'hook and Loop' Tape

IMG_0756.JPG
IMG_0763.JPG
IMG_0758.JPG
IMG_0757.JPG
IMG_0755.JPG
IMG_0754.JPG
IMG_0765.JPG
IMG_0764.JPG
IMG_0762.JPG

Now to make a fit check. If you can wrangle your pup get a rough estimate as to how tight the chest and next can be without making it too tight. I was looking to make sure he could still move and walk.

I recycled some hook and loop from some pockets of an old pair of shorts that no loger fit me.

I sewed on the two sides to each area. the neck and the chest flaps needed to have one (hook) on the out side of the fabric and one (loop) section on the inside of the fabric so that they can mate when the two halves are pressed together.

Try and Get a Photo of Your Dog in the New Rain Coat

IMG_0781.JPG
IMG_0774.JPG
IMG_0759.JPG
IMG_0776.JPG
IMG_0768.JPG
IMG_0770.JPG
IMG_0777.JPG
IMG_0766.JPG

Lucky is always on the go, and to get a still photo of him in his new rain coat was proving to be impossible as he wanted to run and play in his new attire. He has never had anything put on him besides the cone of shame after getting neutered. He seemed to want to play and didn't seem restricted by his new coat.

I will take him next time it rain instead of telling him we can't go due to the rain. I hope he will feel comfortable and knowing he won't come home a soaked to the bone wet puppy will make me happy.