Water Rocket Launching Pad

In this instructable i would demonstrate to all of you how i have built a launching pad for water rocket and at the same time how i have built my first water rocket. For building it i paid attention to:
1 safety for my kids (the bottle can be painful on face),
2 build a launching pad with materials found in woodshed and garage of a country house.

The materials used are:
(2) wooden pieces 10x10 cm (sz)
(1) 15x1,8 cm (sz)
(1) easel

The measures are approximate they depend on materials that you will find in your garage.  The important thing is the final result: launching pad must  force the rocket to follow a trajectory how to the video's shows:

To make my rocket i used recycled materials and simple tools:
- Plastic bottle
- Electrical tape
- Bottle cork
- Cutter
- Scissors
- Air pump
- Soccer ball plug valve
- And a DRILL (sorry i don't have a photo!)

You must be sure that the cork close hardly the bottle, otherwise you must put tape around the circumference of the cork.
The plug must be longer than the cork.
Make  a hole in the cork for the plug (make it very tight).

Don't put too much water in the bottle (see the photos), push the cork very strong  in the nozzle of the bottle.
Put the rocket on the launching pad and pump the air and.........................................................................................
..............................................................................LIFT OFF!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!SEE THE VIDEO AT THE BOTTOM OF THIS PAGE


Thanks for support to Tiziana and Bostik