Use CO2 Laser Cutter Cutting Standing Acrylic Nameplate

by AshleyW153 in Workshop > Laser Cutting

6 Views, 0 Favorites, 0 Comments

Use CO2 Laser Cutter Cutting Standing Acrylic Nameplate

01.png

Prepare:

  • A co2 Laser Cutter
  • Clear Acrylic
  • Coreldraw software

Design the Nameplate in Coreldraw

1.png

I usually design in coreldraw software, here I put the information we need

Set Parameter on Control Software

2.png

I set engraving and cutting for different color line

Put in the Acrylic Sheet and Start Engraving

3.png
4.png

Install the Standing Nameplate

8.png
5.png
6.png
7.png

Take off the protective paper and install the standing nameplate