Ultimate Airsoft Sambucus Gun

by ivver in Outside > Launchers

11597 Views, 63 Favorites, 0 Comments

Ultimate Airsoft Sambucus Gun

20140615_123245.jpg

Hello everyone!

When I was a kid, I used to play with this gun, it is easy to make and very fun to play with.

Sambucus (elder or elderberry) is the type of wood that has a hole through the trunk, this hole is filled with some spongy material which has to be removed for this project, I'll guide you through the whole process of making this gun.

Operation Principle

rrfrrrr.png

The principle is, you have two caps each on one side of the pipe, when you're pressing one cap close to another one you are compressing the air and then that compressed air pushes the second cap out of the pipe.

Tools and Materials:

20140615_105501.jpg

You'll need:

-saw

-a metal rod

- knife

- elder

- hemp ( that's what google translate translated, I don't know exact english word for that, I know that this thing is often used for caulking the pipes, but in further steps I'll call it hemp)

Find Elder and Right Shape of Wood

20140614_163005.jpg
20140614_163415.jpg
20140614_165811.jpg

I put some descriptions in pictures.

So, the task is simple, find the elder and cut the piece of it. The best elder for this is usually about 3-4 years old, then the hole is right diameter.

Preparation

20140614_165830.jpg
20140614_170156.jpg
20140614_170834.jpg

Do as shown in pictures. :)

Removing the Spongy Stuff

20140614_170349.jpg
20140614_170541.jpg
20140614_171449.jpg

Take some long metal rod and try to push it all through the whole wooden part, that way you should remove spongy stuff. That's the way how I was doing it, if you have some other better idea just post below because I'm searching for some better way.

Adding Wider Cap on Metal Rod

20140615_110527.jpg
20140615_111341.jpg

It is smart to do that because that way metal rod can't pass through the hemp cap and it can not damage the pipe.

Cleaning the Pipe

20140615_105649.jpg
20140615_105814.jpg
20140615_105846.jpg
20140615_105909.jpg
20140615_105927.jpg
20140615_110208.jpg
20140615_112228.jpg

Make some balls from hemp so they can fit in the hole, soak them in the water and then push'em through the pipe couple of times.

Finding the Right Side

20140615_112413.jpg
20140615_112652.jpg
20140615_112710.jpg
20140615_112506.jpg
20140615_112626.jpg

It is not the same if you try to push the hemp cap through one or other side, it is because the wood is conical shape. You know that you find the right side when you are pushing harder and harder through the pipe, it is good because then is seals gaps and stops the air from passing through.

The End

20140615_123142.jpg

Here is some test shooting, the sound is not something special because it is GoPro camera but it is prof that it works! :D

Thanks for watching and having interest in my project! If you have some questions or anything, just post below in comments!
Please vote!


Cheers