Two Person Phone
This is a Bluetooth speaker that I made in class. Called the two-person phone.
Supplies
Soldering First Parts
In this step, you can solder the hardwire connections to the electronics.
Slicing the Print
In this step, you will have to open up a slicer. You use the files to create the sliced parts. I used the Cura lulzbot slicer for this print.
Printing the Print
using a printer put in the storage drive. make sure you have enough filament and activate the print
Finalize the Soldering
once the prints are done you can attach the speakers and finish the soldering
Hot Glue Galore
use hot glue to attach the two parts of the speaker
Activating the Speaker
Turn it on