The Rubber Band Cardboard Gun

by Pythonkev007 in Craft > Cardboard

595 Views, 0 Favorites, 0 Comments

The Rubber Band Cardboard Gun

WIN_20191007_17_45_12_Pro.jpg
WIN_20191007_17_45_17_Pro.jpg

With this AWESOME Cardboard Rubber Band Gun, shoot rubber bands 10 whole meters! Impress your friends with this awesome rubber band cardboard gun by 100% pinpoint accuracy, but make sure not at anyone's faces!

Supplies

You will need:

- A cardboard tube

- A split pin

- 2 rubber bands

and...

- A loop-top screw

Making the Pullback System

WIN_20191007_17_47_00_Pro.jpg
WIN_20191007_17_47_17_Pro.jpg
WIN_20191007_17_47_44_Pro.jpg
WIN_20191007_17_47_49_Pro.jpg
WIN_20191007_17_45_21_Pro.jpg

First up, get your cardboard tube and make two small holes at each end. At one end, screw in the loop-top screw (as shown), and put the split pin on the other side; the head facing in the tube.

Finishing Touches!

WIN_20191007_17_48_05_Pro.jpg
WIN_20191007_17_48_07_Pro.jpg

All you have to do now is put a rubber band at the bottom of it so the rubber band you are shooting doesn't fall off every time. Done! All you have to do now is load it by putting a rubber band around the front of the split pin, and at the back of the loop-top screw! (BTW, the rubber band at the bottom helps reload it)