the Belt Screwdriver
If you are a MacGyver type of person, you will need this belt.
You never know when you might need a screwdriver.
In this Instructable, I demonstrate a way to add a screwdriver to your belt.
As long as you are wearing your belt, you'll always have a screwdriver with you.
If you are Interested in the video version of this Instructable and the embedded video does not appear on your mobile device, here is an alternative link
Remove the Prong From Your Belt
Bend the Screwdriver in the Shape of a Prong
I used one of those voltage testing screwdrivers.
I find them very handy as they also fit some Philips screws.
I broke off the handle and bent the screwdriver to make a prong.
Cut Off the Excess
Finish It!
The screwdriver was too shiny for my belt, so I heated it up with a blowtorch to remove the shine.
Now it looked almost the same as the buckle.
Next time you need a screwdriver, just take it out from your belt.
If you need a better grip, you can leave it in the belt and use the buckle as the handle.