Tetrapod Candle Holder
I'm showing you how I made the Tetrapod Candle Holder using cement. You can make it by making a mold using OHP film and Foamex, and pouring cement dough into the mold. You can see a brief description of how to make the Tetrapod Candle Holder here, or you can watch a video that shows how to make it in more detail.
Supplies
wooden stick, candle, paper bowl, scissors,
knife, instant adhesive, tape, paper cup, circular cutter,
foamex 1mm, OHP film, mortar cement
Downloads
01. Place the OHP film on the paper, make a pattern, and cut it with scissors.
02. Prepare a total of 4 ‘Part B’.
03. Attach tape to the end
04. Roll up the OHP film and fix it on the opposite side.
05. Cut the Foamex according to the drawing with a circular cutter.
06. Then push it into the OHP film
07. Fix it with instant adhesive.
08. Make 1 set of ‘Part A’ and 3 sets of ‘Part C’.
09. Assemble using tape.
10. First, connect 3 sets of ‘Part C’, then
11. Attach 1 set of ‘Part A’ at the end. That way, you can put your finger inside and secure it.
12. Make a picture together and complete it.
13. After pouring water into the mortar cement,
14. Mix well.
15. After filling the mold with all the cement dough,
16. Before the cement hardens, quickly insert the candle into the hole (about 20mm).
17. Store it in this state for about a day.
18. Once the cement has hardened, carefully peel off the mold with a knife.
