Ten Minute Bazooka
Ten minute bazooka
What you need: 3/4" pvc pipe, pvc cap to fit the pipe, rubber mallet, Co2 cartridge (the kind for soda siphons), screwdriver, drill, drill bits, Dremel
What you need: 3/4" pvc pipe, pvc cap to fit the pipe, rubber mallet, Co2 cartridge (the kind for soda siphons), screwdriver, drill, drill bits, Dremel
Step 1
Ten minute bazooka
What you need: 3/4" pvc pipe, pvc cap to fit the pipe, rubber mallet, Co2 cartridge (the kind for soda siphons), screwdriver, drill, drill bits, Dremel
What you need: 3/4" pvc pipe, pvc cap to fit the pipe, rubber mallet, Co2 cartridge (the kind for soda siphons), screwdriver, drill, drill bits, Dremel
Step 2
You will need the pipe and pvc glue
Glue the cap to the end of the pipe.
Glue the cap to the end of the pipe.
Step 3
Tap the cap on to the pipe. Let it dry, then drill a hole smaller than the screw.
Use the drill or screwdriver and screw the screw into the small hole.
Slide the inner tube over the pipe and tape the inner tube with duct tape. You can tape one of your old belts to the pipe for a shoulder strap.
WARNING DO NOT POINT AT ANY ONE have fun