TEXT Puzzle Made With Tinkercad

by Splat in Workshop > 3D Printing

484 Views, 3 Favorites, 0 Comments

TEXT Puzzle Made With Tinkercad

GEDC1269.JPG

This is not an ordinary puzzle. The puzzle pieces are letters that spell TEXT. I got the idea from a puzzle I saw once but it was just with the letter T. Then when the Text contest came up, I had the idea of making it but with more letters. After I worked on it some, I was able to get four T's, four E's, and one X to fit in a square.

The Design

Text_puzzle.PNG

I used Tinkercad to make the design for the puzzle. Click here for the link to the puzzle

Printing the Puzzle

GEDC0586.JPG
GEDC1101.JPG
GEDC1107.JPG
GEDC1110.JPG
GEDC1257.JPG
GEDC1261.JPG
GEDC1264.JPG

below are the STL files for the parts and the print settings I used.

  1. Bed temp: 65
  2. Extruder temp: 200
  3. Filament type: PLA+ and PLA pro
  4. Support: none
  5. Build plate adhesion: skirt

Spoiler Alert

Text_puzzle2.PNG

WARNING! I AM ABOUT TO SHOW YOU THE SOLUTION TO THE PUZZLE. IF YOU WANT TO TRY TO FIND OUT THE SOLUTION YOURSELF, PLEASE CLOSE THIS PAGE.

I Am Going to Show You the Solution in This Step!

Text_puzzle3.PNG
Text_puzzle4.PNG
Text_puzzle5.PNG
GEDC1272.JPG
GEDC1285.JPG
GEDC1290.JPG
GEDC1293.JPG

Thanks for checking out this instrctable. Please check out my other projects here and my other Tinkercad projects here If you made the puzzle, please post a picture of it in the comments.