Star Trek Enterprise

These are the voyages of the star ship enterprise

cardboard

Hot glue

Sicers

Rull

first you will cut two circles .And then you will cut a piece of cardboard 1ft 7in long and 1in wide and glue it to the circle and it is supposed to have a little gap like in the picture

Were that gap is you will cut a little piece out of the circle.And then you will glue the other circle on top and after that you will get a piece of cardboard this is the patern 2in,51/2in,2in,51/2in,3x and then you will glue those together then glue it in the gap

and now you will cut a piece of cardboard 31/2in long and 1cm wide and glue it in center of the top of the ship and then cut a circle and glue it on top of that circle

and now you will cut a piece 7in long and 7in wide and peal the top off of it then make a circle and glue it

now you will cut a piece of cardboard 7in long and 1in wide 4x and put to of them on top of and glue them together and then glue them on the ship

And for the final step you will cut two 7in long and wide pieces and then take the top off so you can make two circles and then glue them on the to sticking out pieces on the ship.