Simple Igniters

This Instructable will show u how to make igniters without nicrome wire. Plus the can be set off with a 9v.

Supplies:
+2 2inch pieces of stiff wire.
+1 1inch piece of thin craft wire.
+electritions tape
+1 match

Tools:
+wire strippers
+lighter

1.strip about a quarter of an inch off of 1 end of the wires.

2.strip about half of an inch off of the other side.

1.tape the wires together leaving about a guarter of an inch of unstripped wire on each side.

2. bend wires like shown.

3. separate the top wires like shown in pic 2.

1.burn a 1 inch length of craft wire to get the coating off.

2.untwist the wire so its separate strands.

3.Take 1 strand and put it in the 2 stits at the top of the wires.

4.twist top of wires nad bend down like shown.

1.tape a match to the side so that the head is pressed against the craft wire strand.

2.Enjoy. Made to be used with my detonator.