Simple Fun Cubic Puzzle in Tinkercad

Hello everyone....

In this instrutable we will be making a simple fun cubic puzzle which is very easy to make and and very good exercise for brain development for the young ones also when you feel a little bored you can try to solve this in your free time that will give you marvelous joy and pleasure.

I have shared the files of this Tinkercad ,so you can print it out and have fun.

SO LET'S GET STARTED.

• 3D printer
• Tinkercad software

Take a square and repeat it two times with ctrl +D as shown in above images.

Now again repeat the triple square combo with ctrl+ D to make more squares.

Now do the same as in previous steps as shown in images.

Once done, we have a bigger square now.

Now we will break the square in different shapes' for the puzzles as shown in above images.

Now we will color them and join them again to form the bigger square as shown in above images.

Now we will break them again as shown in above images.

Now we will bend every shapes 90 degrees and place them in the bottom as shown in above images.

And we our ready to play.

Thanks for watching :D