Simple Firework Detonator

This instructable will show you how to make a cheep detonator that works realy well. It is made to be used with my ignighters instructables.

Supplies:
+1 prodject box.
+2 switches, i used a toggle with a cover and a momentaraly push.
+1 9v battery terminal.
+1 9v battery.
+2 aligator clips.
+insulated wire.

Tools:
+wire stripers
+Drill

1.Drill holes in the top of the prodject pox for the switches.

2.Drill holes in the front of the prodject box for the wires.

1.put the switches into the holes and tighten until they dont move.

2.run a wire from the 1st switch to the 2 switch.

3.connect 1 wire from the battery terminal to the 1st switch.

4.connect a wire to the other end of the battery terminal and push it through a hole in the front.

5.connect a wire from the 2nd switch and push it out the other hole in the front.

6.Put alligator clips on the wires sticking out the front and close up the box and your done. Enjoy.