"Side-Dish" the Electric Hand Held Dish Washer
189 Views, 2 Favorites, 0 Comments
"Side-Dish" the Electric Hand Held Dish Washer
!["Side-Dish" The Hand Held Dishwasher](/proxy/?url=https://content.instructables.com/FTA/D6ZG/KPB70PF9/FTAD6ZGKPB70PF9.jpg&filename="Side-Dish" The Hand Held Dishwasher)
The electric hand held dish washer
Measure or trace your dc motor and cut a hole using a dremel tool. Pliers are to pull the pieces that get stuck.
Measure or trace your on/off switch and cut a hole using a dremmel tool. I used a little helping hand I made previously.
Wire the motor and feed it through to the hole of the switch. Wire the switch and feed back through down to the batteries. I used 2 (AA A) You can find how to wire a dc motor to a switch and battery on youtube or here on Instructables.
Make sure everything is wired correctly and taped or sleeved. Check to to see if it turns on! I used a hot glue gun to glue the motor and switch. I also used a ceramic magnet to hold the battery at it's base and glued the cap on with super glue.
!["Side-Dish" The Hand Held Dishwasher](/proxy/?url=https://content.instructables.com/FIS/QYUB/KPB70MWW/FISQYUBKPB70MWW.jpg&filename="Side-Dish" The Hand Held Dishwasher)
I added a little green SOS pad so I could scrub the dishes ;) You could add many different attachments for your desired needs ie: Cutting wheel, sanding wheel, abrasive pads for cleaning the tub and tiles. Use your imagination. I hope you get something from this Instructable and exscuse my poor description and lack of wiring diagram this is my first upload.