Sail a Ship Kite

Kites are very special....practically every single kid flies one...be it a store bought one or a bag tied with a string ....desperately trying to fly it!
Most people have made a kite at some point in their life...but i have a confession...I have never made one...we used a store bought one when we were kids :-)
So now i go back to being a kid...i wanted to make my first kite!
I did a Google and fell in love with this
So...a normal sane person ...would go for a simple kite right? well.....I desperately wanted to make the ship my first kite! lol...
pretty ambitious huh? especially for someone who has never ever made a kite in her life!
Well...it wasn't so bad....it was pretty easy and fun....and I did it all from scratch! check it out

I used bamboo sticks which i cut and cleaned.
also some kite paper ...you can use rip nylon if you are very confident....remember...this is my first attempt!
string to tie,
glue
bamboo skewers

loads of hopefulness :-)

I did not take specific measurements.....I just eyed it and went with esthetics :-)
I have named the sticks so you may easily refer to them and make the cut list .
Take stick 'B' and attach sticks 'C' perpendicular to it as picture.
Then take your long Stick 'A ' and Curve and secure it 'B' and 'C' as picture.
Make small slits on both ends of 'D' so you will be able to easily slot the wire in the next step.
Secure 'D to B and C as picture.
Now pass a strong but light wire across the slits in D and around 'A' to make the boat shape.

Easy right?

To make the Sails..

 Rectangle sails...use 2 of Stick 'E' per sail
Cut 2 rectangles to slightly longer than the distance of Both 'C' sticks..
Secure the paper as shown in picture to the sticks.

Flags-
Cut the shape of a flag in the paper and glue to skewers.

Triangle Sails - make the shape of the triangle sail with wire...making sure to form a loop at each end. this is so you may easily tie a string without tearing the paper. place the shape on paper and cut around leaving a border...overlap and glue.

Tail - For the tail...(.this is optional as i love tails...but it's also better for the kite.) simply glue tiny flags to a sting.

Cover the boat with paper or fabric.
Now lets start assembling.
first attach the rectangle sails.
Then pass a sting through the loops of the triangle sails and secure to the poles as picture.
Attach the flags at the 3 ends as in picture....you may of course vary...this is just my ship!
Run a tight string from the top of both 'C' to the boat corners....attach flags.
Attach the tail to the back of the  boat.
Secure flying cord at points as show in picture.
When you are about to sail on your maiden voyage...attach the long cord to this string.

Now a kite can't be much of a kite if you can't fly it!
I got so many skeptical looks and comments that it's not going to fly...that it's too big ! hmm...yes...it's big... 5ft wide and 4 ft high!
oh...why couldn't I make it smaller!!! 
So with prayers ... My family took it for it's Maiden Voyage today....the beach is just down the lane :-)
We went early before anyone came to the beach....as we didn't want to look like fools when this ship of mine didn't take off! lol
well....we tried...and what do you know.....it flew! my baby flew! it was beautiful!....it went up and up...and then the nylon thread broke!
yeah...sad isn't it?...well...we had to get back anyway...my kids have school at 7.30 in the morning...it was already 6!

next time...I shall try something else for the string :-)

so what do you think of my first attempt at kite making and flying? you like it?
Then please please vote for the 'kite contest ' and the 'I can do it' contest! I would love your vote!
Any feedback would be appreciated too! :-)