Remote Controlled Home Automation

This a simple Budgeted Home Automation system using simple components to control various appliances like Lights, fan, fridge, charger, etc...

1. ELEPHANTBOAT Plastic Wireless 4 Way on/Off Wall Lamp Light RF Remote. View about the component
2. Copper wires.
3. Insulation Tape.

1. First of all put off your main Board in your home.
2. Remove the screws in the switch box and Note down the wire colours inside the switch box. Also, make a note of it.
3. Now, Take the out wire from the two-way switch and connect it with the wireless receiver (You can connect upto 4 switch's using this receiver.
4. After connecting the wires properly, tape everything with the insulation tape.
5. Now screw back the switch box and Turn on the Main supply.

Now you can be able to TURN ON and OFF your appliances using the remote.

NOTE: Your receiver should be outside of the switch box( as shown in the image).