Recycled CapriSun Wallet
We used a couple of empty CapriSun pouches and some duct tape to create the CapriSun Wallet!!
Materials Needed......
Two empty CapriSun Pouches
Duct Tape
Duct Tape
Cut and Clean
Cut the top off of both pouches and clean them with soap and water.
Pouch Surgery
We will be cutting half of both of the pouches open.
Lay them face down with the open tops facing each other.
Starting at the cut top edge, cut down the sides so that the pouch on the left will be able to slide inside of the pouch on the right.
The pouch on the right can be modified so that a credit card can be slid into it also. (just cut a half inch section out of the flap that overlaps the left pouch.)
Lay them face down with the open tops facing each other.
Starting at the cut top edge, cut down the sides so that the pouch on the left will be able to slide inside of the pouch on the right.
The pouch on the right can be modified so that a credit card can be slid into it also. (just cut a half inch section out of the flap that overlaps the left pouch.)
Joining the Pouches
Test fit the pouches together. Now would be a good time to size the slot with a dollar bill.
Bring on the duct tape.......
Go sparingly (I try to use as little as possible to not cover the design on the pouch)
Don't forget to apply some tape to the inside of the wallet money slot.
Bring on the duct tape.......
Go sparingly (I try to use as little as possible to not cover the design on the pouch)
Don't forget to apply some tape to the inside of the wallet money slot.
That's All
Fill your new wallet with some cash and a credit card , and your good to go!!!!!!!!!!!!