Raspberry Pi WiFi Pentesting Device

by tjpk2000 in Circuits > Wireless

772 Views, 2 Favorites, 0 Comments

Raspberry Pi WiFi Pentesting Device

Photo on 4-30-19 at 7.17 PM #2.jpg

This is a simple WiFi Pentesting device using a Raspberry Pi and in pt2, a cheap wifi adapter.

Supplies

Photo on 4-30-19 at 7.04 PM.jpg
Photo on 4-30-19 at 7.03 PM.jpg

Get your supplies:

A raspberry Pi

A (fabric) Camera Case that fits your Raspberry Pi

A Micro USB cable.

That's it!

Assembly

Photo on 4-30-19 at 7.05 PM.jpg

Mark a hole where the Micro USB port is on your RasPi on your case. (I used crayon)

Cut the Micro USB Hole

Photo on 4-30-19 at 7.16 PM.jpg

Cut the hole you marked where the Micro USB port is. Sew the edges, if necessary.

Assembly

Photo on 4-30-19 at 7.04 PM #2.jpg
Photo on 4-30-19 at 7.17 PM.jpg

Put the RasPi in the Case. Make sure the hole you cut lines up with the Micro USB port.

Plug in the Micro USB cable. You can hook this up to a USB power bank, Laptop, Etc... Anything that can supply power. Now load it up with the proper pentesting software and have fun!