Raft Action!
Here's a raft I made a couple years ago to navigate the toxic waters of the Chicago area when i lived there. There are a couple holes in my documentation of building this, I didn't know about instructables at the time, so if you are unclear about anything let me know and I'll try to edit it.
Cutting the Pieces.
So I found these three 4X8X2 Extruded Polystyrene sheets in a dumpster, the ends were all raggedy and busted so I cut them down to six feet long. Good luck finding your sheets in a dumpster however, I've never found this many relatively full size foam sheets anywhere ever again...sorry to say. Anyway, cut them up into one foot wide sections.
Glue That Shit!
Check out the notes.
Let It Sit.
Check out the notes.
Well This Is Just Plain Unecessary!
Check out the notes.
Cut That Out.
Check out the notes.
The Wooden...things.
Check out the notes.
More Wooden...things.
Check out the notes.
Make Believe This Is a Real Boat.
Check out the notes.
Make Your Raft Into the Merrimac.
Check out the notes.
Nice Raft, Sort Of.
Check out the notes.
Done.
Check out the notes.
The S.S.Bear-Audrey on her maiden voyage, do you sense another plot hole? It's true, I didn't take any pictures of building the deck, you could just put a big piece of plywood on there, I made my piece so it would fold and sit in my car.
And thus ends my first Instructable, thank you for reading.
The S.S.Bear-Audrey on her maiden voyage, do you sense another plot hole? It's true, I didn't take any pictures of building the deck, you could just put a big piece of plywood on there, I made my piece so it would fold and sit in my car.
And thus ends my first Instructable, thank you for reading.