RC Plane Made From a Broken RC Helicopter

by RobertA30 in Circuits > Remote Control

2692 Views, 8 Favorites, 0 Comments

RC Plane Made From a Broken RC Helicopter

DSCF7265.JPG

This the plane I made from a broken helicopter I had.

The Electronics

DSCF7261.JPG

I took the electronics out of a broken helicopter. They will be glued to a balsa wood glider

The Plane

DSCF7264.JPG
DSCF7263.JPG

Here's some pictures of the glider and the electronics

Installing the Electronics

DSCF7266.JPG

Hot glue the receiver in the middle along with the battery. glue the motors in the front on each side of the wing. The propellers will be installed last. It's inferred controlled and can only be flown indoors