RC AMPHIBIUS MISSILE LAUNCHER WITH WIFI CAMERA

Making exciting toys while on holiday with the family is a very fun atmosphere. Having crazy ideas sometimes requires a high level of imagination. This time I will explain a little more about how to make a car that can run on land and in water equipped with a rocket launcher. Have fun.

Materials needed:

2 sheets of Impraboard

Enough glue gun

Enough aluminum foil

Colorful cables

Rc 5 channel pcb board

Mosquito trap PCB board

3 battries 3.7 volt 500 mah

Limit switches

Switch opener toys

10 ml syringe

2 dynamo gearboxes

1 can of spray paint

Styrofoam as needed

Enough plastic mica

Thin copper for antenna amplifier

0.2 pixel wifi camera

Required tools:

Electric soldering iron

Tin

Cable stripper

Isolation

Ruler

Scissors

Whiteboard marker

spirtus

1. Putting two gearboxes together with impraboard

2. Make fins on all wheels

3. Make the upper body from impraboard

4. Make a rocket or missile launcher from impraboard and 10 ml injection and 2

5. Add plastic mica sheets for the windows

6. Arrange the upper chain

1. Arranging the bottom circuit, adding the antenna tip with copper sheet

2. Make an antenna with a layer of aluminum foil

3. Add foam below

4. Setting the remote signal range with the transmitter

5.Install the wifi camera unit and battery in the upper body on the lower hood of the car

How a rocket or missile launcher amphibious car with a WiFi camera works:

Install the batteries in the three units in the car. The car remote control unit and the rocket launcher.

WiFi camera unit. Then connect the camera to WiFi on your cellphone with the FPV camera application. After that, run it as you like and good luck.