Plant Sunlight Alerting Armour

In a yard every one has a favorite plant. Yes and sometimes you wonder is my plant buddy save. Well I alone also thought about the same problem. So with my circuit skills I made an Armour for plants that alerts you when it is not getting sunlight and most importantly with only 2 cells. Well this can be applied at any plant and sometimes it can even alert when someone tries to hit it.

As you know an Armour need to be strong so I have tried my best to install good sensors and a great distracting alarm system. The point is that the sound will stop when there is less light. The list.

• Speaker or light ( or both)
• 2 1.5 cells
• a battery bank
• A slide switch
• Main music file ( if you use the speaker and The U1 in the picture is the music file)
• Sensor (that stops when not exposed to light)
• Jump wires
• 6 2 snap wires
• 1 7 snap wire
• 1 6 snap wire
• 2 5 snap wires
• 1 3 snap wire
• Your plant

Put the cells in the battery bank and connect it with a slide switch

Now connect a 5 snap wire connect with the other end of the switch. Now connect a 3 snap wire at the second last place of the 5 snap wire. Now take a U1 or a music file and connect it with a 3 snap wire. Use a 2 snap wire to connect it at the bottom left corner of the U1 or battery file. Connect a 5 snap wire with the 2 snap wire and the battery bank at its both ends.

Connect a jump wire at the middle of the 5 snap switch located with the slide switch. Then connect another jump wire at the upper right of the U1 or battery file. Now connect a sensor (that stops when not exposed to light) with the end of the 2 jump wires.

Connect 2 snap wire at the bottom right of U1 or music file. Connect another one at the 2nd button at the 5 snap wire located near the slide switch. Now Connect a 7 snap wire at the 2 snap wire at the U1 or main music file that flows and stops to a bulb and connects. Now connect a 6 snap wire at the remaining 2 snap wire that also flows to the bulb but to equalize the length with the 7 snap wire connect another 2 snap wire to the 6 snap wire. Now connect the speaker with the bulb with 2 2 snap wires.

Just place the sensor on the plant top.