Pirate Ship

by Murcielago in Living > LEGO & K'NEX

91 Views, 0 Favorites, 0 Comments

Pirate Ship

20221124_184002.jpg
20221124_184048.jpg
20221124_184336.jpg

Pirate ship made from brick mix and a couple of additional materials. The ship consists of 3 parts: body, deck and upper deck. All spaces are accessibe and fitted to the Lefo folk.

Ship Base 1

20221124_185411.jpg
20221124_185435.jpg
20221124_185337.jpg
20221124_185305.jpg
20221124_185241.jpg
20221124_184942.jpg
20221124_184921.jpg
20221124_184858.jpg
20221124_184848.jpg
20221124_184212.jpg

The base is done of 2 6x12 plates. On top of it 6 expending layers of 2x4 bricks construct the walls. Small side and rear windows can be inserted into the walls.

Ship Base 2

20221124_184731.jpg
20221124_184232.jpg
20221124_184226.jpg
20221124_184201.jpg
20221124_184153.jpg

The walls are reinforced by flat plates. There are limiters for the deck in the corners.

Deck

20221124_185924.jpg
20221124_185916.jpg
20221124_185930.jpg
20221124_190015.jpg
20221124_190031.jpg
20221124_185850.jpg
20221124_185806.jpg
20221124_185650.jpg
20221124_185627.jpg

The deck is constructed and reinforced by different plates. The fence is built on the edges of the deck. The captan's cabin is built from thin bricks on the rear part. The cabin has a door and windows. There are a table, a chair and a bed inside the cabit. The cabin's walls are reinforced by thin plates with limiters in the corners for the upper deck.

Upper Deck

20221124_184100.jpg
20221124_184054.jpg
20221124_184443.jpg

The upper deck is based on flat plates. The fence and the steering wheel are built on it. A ledder to the deck can be added.

Mast and Sail

20221124_184011.jpg
20221124_184126.jpg
20221124_184113.jpg
20221124_184324.jpg
20221124_184336.jpg
20221124_184348.jpg
20221124_184356.jpg
20221124_184516.jpg
20221124_184541.jpg
20221124_184549.jpg
20221124_190750.jpg
20221124_190757.jpg
20221124_190844.jpg

A single mast is made of 3 connected bars and attached to the deck in a slot. 3 cords attached to the fence stabilize the mast. 2 booms made of 2 connected hole bars are attached to the mast by rings around the mast.

The sail is made of hard plastic sheet. The cords are inserted through holes. The sail can be folded and winded on the lower boom.

No Limits for Improvements

20221124_184011.jpg
20221124_184256.jpg
20221124_184247.jpg
20221124_184324.jpg
20221124_184440.jpg
20221124_184430.jpg
20221124_184506.jpg