Ping Pong Ball Smoke Grenade (easy!!)

by _boogeyman in Outside > Survival

6161 Views, 129 Favorites, 0 Comments

Ping Pong Ball Smoke Grenade (easy!!)

2013 5:52 pm.jpg
This project is very simple, quick and fun to do. Only a few items needed and a lot of smoke put out!!!

Items needed:

-scissors
-aluminium foil
-4 ping pong balls (decent quality)
-pen

Cut Foil

2013 5:52 pm.jpg
Cut out about a 15x15cm square of aluminium foil.

Cut Ping Pong Balls

2013 5:52 pm.jpg
Take the ping pong balls (leave one) and poke a hole in the top with a pen or sharp object, then just cut he balls into little strips.

Assembly (part 1)

2013 5:52 pm.jpg
Take a ping pong ball and cut a hole in the top, about 1 cm in diameter. Put all of the other cut up strips inside the ball packing tightly.

Assembly (part 2)

2013 5:52 pm.jpg
Place the foil in the palm of your hand, then put the full ping pong ball in the middle of the foil, wrap the foil around the ball leaving an air hole at the top (use the pen as a guide if need be).

Ignition

2013 5:55 pm.jpg
To light: hold grenade by stem, hold lighter under ball part and wait until some smoke oozes from the stem, the throw or put down the ground and watch as it billows smoke.

I hope you enjoyed this instuctable... Thanks for viewing and don't forget to follow!!