Permanent Shoe Dyeing Technique
by emekaiwuagwu419 in Craft > Fashion
721 Views, 0 Favorites, 0 Comments
Permanent Shoe Dyeing Technique
Many years ago, way back before i was born my country fought a civil war. During that war, my dad who happened to be a soldier was also an officer. They wore leather boots and just as you know it stood no chance against the weather and the elements. The soldiers had to walk through water, mud and God knows what as they moved. And that made the leather boots vulnerable to caking, cracking and tearing. Its also worthy to note that absorbing water made the boots heavy and increased the risk of fungi infections i.e athletic foot. So an ingenious means was deviced to fix this problem by dyeing and burning the leather with candle soot. I will like to state emphatically that this process helps me restore most of my foot wears. I also want to use this opportunity to say a big thank you to the colour black for being a neutral colour for fashion, i have slavaged and restored alot of shoes through this process.
Tool and Materials
The tools you will need are:
- Applicator brush
- candle
- latex gloves
- lighter or match
the materials are:
- kiwi black polish
- shoe dye
- candle wax
- and a pair of worn out boots or shoes.
Prepping the Shoe for Dyeing
Before you proceed to the dying proper, wipe both pairs with a dry rag then wet it up. You can use a portable sprinkler can a spare brush or just your hand. Allow the water soak in for about 1-2 minutes. Allow the shoes to dry up abit. Tape the shoe using masking tape to safe guard the parts you dont want dye on and the flame from touching.Take the shoe lace off also and stuff the shoe if its not a hard top shoe or canvass.
SAFETY FIRST
The dye is a harmful chemical and as such, should not be inhaled use in well ventilated area possibly outside or wear a face mask with filter. Wear rubber or latex gloves because the dye will stain your hands and also to prevent hot wax from dripping onto your hand. Do not stand facing a fan or the wind please and remember to read the instruction following your dye in reference to content and flammability.
Dyeing Process
Use the brush that comes with the dye to apply one coat over the shoe working your way around the whole shoe. work fast directly from the bottle or pour out some quantity and use(the dye vapourises quicky). After full application set aside to dry. Light a candle and start the burning process gradually. when burning the dye into the leather or material, the soot flame is what is used before a general runover with the flame to incinerate all stray fibers. Allow to cool down polish again then set in the sun to dry, buff or sponge to a shine. A repeat coat is in order depending on the shade u want.
Gallery of Succesful Dyeing
With the result of my first trial i tried another pair given to me by my elder brother.......
VAGABONDISM MODE DOWNLOAD FAILED
SOME ONE JUST ASKED WHAT THE HELL IS WRONG WITH YOU........ LOL. But truth be told nothing beats the feeling of having your shoes restored.