Pen/ Pencil Holder

i am a student at North Broward Prep school and this design was created in Fusion 360 for a 3D design project I got assigned in class, I created a pen/ pencil holder for you desk to keep all of you writing utensils organized.

For this step you should add a cylinder to your work plan and adjust the measurements to a diameter of 40.00mm and a height of 45.00 mm ( or whatever size you want to make yours).

During this step you should create a hole inside of your cylinder and adjust the sizing to 30.00mm high and 30.00mm wide. Once you press Okay the hole should appear inside of the cylinder.

For this step I only added one divider splitting it in half but you can add as many as you want. The measurement will be about the same as your hole was because the divider is going inside your hole.

Once you've completed all the steps, your holder should look like this. (If you would like to add more dividers just copy step 3).