Partytime

I love to make cards and I wanted to show how easy it is to make a party invite using dies and punches .The card only takes about 20 -30 minutes to make and because most of what is on the card consists of card/paper it would not cost too much too make .

Step 1 :

Materials -

- card (8x8 inches )

- letters and balloons (these are cut with a sizzix machine)

- candles (these are punched out with a hand held punch)

- flower / letters /dot peel offs

- adhesive gems

- glue,scissors and 3D spaces

- 2 x fabric bows

- 2 x coloured pencils

Step 2 :

Glue the larger letters to the card , top left to bottom right .

Step 3 :

Using the 3D spaces, place some on the back of the smaller letters and them stick them on top of the larger letters .

Step 4 :

Add a silver flower sticker in each corner of the card .

Step 5 :

Glue a balloon each side of the word party .

Step 6 :

Place 3D spaces on the back of the other balloons and then place the balloons next to the ones that are glued down then using you pencil crayons, draw strings coming from the balloons .

Step 7 :

Add the bows .

Step 8 :

Add the word INVITE to the card and add the little silver sticker dots all over the card wherever you like .

Step 9 :

To finish off the card ,add the candles (these have been punched out with a hand held punch ).Then add adhesive gems to the centres of the flowers that were placed in each corner and then add the gems in different places on the card. The Invite is then ready to be sent out .