Paracord Self Defense/Survival With Duct Tape

I used a jig which makes it way easier. First you put your core in the jig. Then wrap around 8 times on each side and tighten.

First get a pen tube. Wrap duct tape around until you get the desired amount. Cut off excess pen tube. Feed the two strands through the tube.

For this step i used the four strand round braid. But you can use many other knots. Just choose one you would like the best. Keep repeating the knot until you get the length you want.

For the handle you also can use pretty much any knot. I used the crown knot.

I used a crown knot again to secure the key ring to the handle. Then cut of the excess paracord and melt it.

This is what you should have after it all is done.