Paracord Flashlight Grip.

by KLethal in Outside > Paracord

12693 Views, 462 Favorites, 0 Comments

Paracord Flashlight Grip.

temp_799244531.jpg
Get a grip on things.

Materials Needed

temp_-529751042.jpg
Flash light small and 2 pieces of paracord each 5 foot long.

Melt Ends

temp_-1490709195.jpg
Burning ends will keep from fraying..

Start the " Boondoggle " Weave..

temp_-273349285.jpg
temp_826828178.jpg
temp_-1679829948.jpg
Find the middles of both strands and cross them at middle point. Widen the crossing to put flashlight in. Tighten it up using both hands you will have 4 lines pointed in 4 different directions.. start with one of the strands and fold it over the next, take the one you just folded over and food it over the next one. the third one tuck under the 1st one folded over, this completes a layer.

Repeat Layer Knotting.

temp_-1421353248.jpg
temp_-643713964.jpg
temp_1067800507.jpg
you'll notice layers go in a clockwise the counter clockwise pattern. Tighten up the slack Evey 5-6 layers or so.

Finishing It Off.

temp_-172357333.jpg
temp_644258272.jpg
temp_-402524504.jpg
temp_-1573251755.jpg
temp_1193114246.jpg
Continue layers gently pulling knot layer smaller. Burn the very ends together..