Pallet of Time

This piece of wood was a pallet piece. The pallet wood was a square piece, however we made a 36" diameter circular line and used a jig saw to cut along the line. Once cut, the board was lightly sanded and stain applied. This picture is showing the start of the staining process.

Picture of the entire board stained. This is now ready to have a top coat added.

These pictures show the few embleshments that was used on the clock. The numbers were created out of flashing material. Each piece was cut approximately 1/2 wide and 2 inches long. The metal ring in the middle is a wreath starter - which can be bought at any craft store. Also, the clock parts were purchase at a local Hobby Lobby store. Here I placed it on the board to see how it would all work together.

You can't see on the side of the clock but I added a trim. The trim is made out of PVC lattice material that you can purchase at your local home builders store. The one I chose was 8' long approximately 2 inches wide and white in color. I painted it to match the paint color of the numbers previously cut out. I also added some metal scrap book clock looking pieces to the front to tie everything together.

This now hangs proudly in my living room for all to see!