Padlock

by Rammone in Workshop > 3D Printing

97 Views, 1 Favorites, 0 Comments

Padlock

Working padlock (1).png

This Is a padlock the code is 000. This should be working.

Supplies

380g of any color filament

3D printer

My project which is below

Print the Padlock Pieces

Working padlock.png

Print the padlock pieces

Assemble

Working padlock (4).png

After printed, line up the 3 disks in the padlock body and put the flat stopper at the bottom of the line

Finish

Working padlock (3).png

Put the padlock stick through all the aligned holes and then your done