PS3/4 Racing Chair

by khinds10 in Living > Video Games

4634 Views, 41 Favorites, 0 Comments

PS3/4 Racing Chair

IMG_20210527_200340837_HDR.jpg
IMG_20210527_200409639_HDR.jpg
main-preview.jpg

Who says your old living room entertainment devices can't live a 2nd life? Old PlayStation? 32" TV only goes up to 720p definition? No Problem! Let's build a simple race car arcade console. UPDATE 6/29/21: This version is the update to a curved enclosed screen with a PS4, 4K resolution.

Supplies Needed

download.jpeg
GamingChair.jpg
PS3-Mount.jpg
Subsonic SA5156 - Drive Pro Sport Racing Wheel for PS3.png
SuperSlim.jpg

Used PS3 Super Slim Console
PS3 Super Slim Wall Mount Bracket
Subsonic SA5156 - Drive Pro Sport Racing Wheel
Racing Gamer Chair
Old 32" Flatscreen TV

First Build the Bottom Platform for the Chair to Fasten To

20181107_193731.jpg
20181107_193745.jpg
20181107_204251.jpg
20181107_204257.jpg

Remove the wheels from the gaming chair and use the wheels bracket mark holes where you would need to then fasten the chair to a wooden base instead.

I've built the chair base with 4 2x4s as a a surround.

Note: create the base to give a stable frame for the chair, but leave it about a foot and a half longer in the front of the chair to then begin to mount the steering wheel and screen.

Build the Steering Wheel Mount

20181107_212923.jpg
20181107_212925.jpg
20181107_212929.jpg

Using 3 2x4s create a basic square shape around the end of the chair platform to mount the steering wheel on.

Build the Frame for the TV Screen

20181207_210349.jpg
20181207_211252.jpg
20181207_211516.jpg
20181207_212013.jpg
20181207_212849.jpg
20181207_212855.jpg
20181207_212021.jpg
20181207_212841.jpg

Create again a simple square shape with 2x4 boards surrounding a square piece of plywood. Notice the right and left 2x4s are left longer. This is to give some extra length to fasten the TV surround to the steering wheel mount. Make sure that everything is tall and wide enough to fix the flat panel TV inside the recesses of the 2x4 frame.

Paint Everything Black

20181207_222814.jpg
20181207_222823.jpg
20181207_223529.jpg

I used a high gloss paint to paint all the wood a solid black color.

Prepare TV for Mount

20181209_155546.jpg
20181209_155547.jpg
20181209_162048.jpg

Using the existing wall mount screw holes in the back of the TV, create a wooden bracket that will allow us to fasten the screen to the wooden screen frame.

The hardest part is: place the L shaped construction you've done so far on it's side with the TV facing downward on a table and the place where the screen is mounted to the arcade unit behind it. This will allow you to fasten the screen to the screen holder.

Mount the PS3 on the Back

20181216_195317.jpg
20181216_195322.jpg

Mount the PS3 on the back of the arcade and leave a hole for Video HDMI / USB cable (for steering wheel) and 120v power to enter the unit.

Decorate / Place Stickers and FINISH!

20181216_195233.jpg
20181216_195244.jpg
20181216_195254.jpg
20181216_195259.jpg
20181216_195305.jpg

I've painted the TV frame surround green and added some race car stickers around the cockpit and outside frame for the final look.