Origami Rocket

by Kiteman in Outside > Rockets

11899 Views, 53 Favorites, 0 Comments

Origami Rocket

DSCF7352.JPG
DSCF7332.JPG
DSCF7333.JPG
DSCF7334.JPG
DSCF7335.JPG
DSCF7336.JPG
DSCF7337.JPG
DSCF7338.JPG
DSCF7339.JPG
DSCF7340.JPG
DSCF7341.JPG
DSCF7342.JPG
DSCF7343.JPG
DSCF7344.JPG
DSCF7345.JPG
DSCF7346.JPG
DSCF7347.JPG
DSCF7348.JPG
DSCF7349.JPG
DSCF7351.JPG
DSCF7352.JPG
DSCF7353.JPG
DSCF7354.JPG
DSCF7355.JPG
DSCF7357.JPG
DSCF7358.JPG
DSCF7359.JPG
You can make a real, working rocket from a simple sheet of paper!

The heart of this is a traditional "water bomb" origami model.  There are already quite a few Instructables on making the water-bomb, so I simply present the steps as photos.

Turning it into a rocket, though...

The fuel I chose for this project was propane from my blowtorch.  It's a happy coincidence that a drinking straw fits down the central delivery tube of my blowtorch.  I cut a straw to a spike, and it became a perfect delivery system for injecting fuel into the water bomb through the inflation hole.

I blew in gas for a few seconds, laid the rocket on its side, then applied a match to the hole.

Woosh!

I normally fuel these with methane (natural gas) from my lab gas-taps, so a few rockets went up in flames while I got the fuel-air mix right...



An impressive feature of these rockets in lessons is their size - I can keep a handful in my pocket, inflating them as I need during the lesson, as we discuss the various factors that can influence the distance they scoot across the desk.