Origami Piano Set

by koala_b in Craft > Paper

785 Views, 2 Favorites, 0 Comments

Origami Piano Set

20210329_013243.jpg
20210328_213614.jpg
In this instructable I will be sharing with you the steps to make an origami piano set.
The word "origami" is used as an inclusive term for all folding practices. The goal is to transform a flat square sheet of paper into a finished sculpture through folding and sculpting techniques. Modern origami practitioners generally discourage the use of cuts, glue, or markings on the paper. In sculpting this piano set no glue, cuttings or markings are required.

Supplies

One side colored and one side white origami sheets ( 2 sheets of the same colour)
Black pen/marker

Piano

20210329_014029.jpg
20210329_014016.jpg
20210329_012221.jpg
20210329_012133.jpg
20210329_012101.jpg
20210329_012036.jpg
20210329_011957.jpg
20210329_011908.jpg
20210329_011838.jpg
20210329_011820.jpg
20210329_011800.jpg
20210329_011734.jpg
20210329_011646.jpg
Take an origami sheet, fold it in half horizontally, unfold and now fold it in half vertically. Now fold, such that vertical edge touches the crease formed from the horizontal fold in the beginning. Now fold both these flaps such that the top edges of these flaps overlaps with the adjacent sides of the respective flaps, a triangular shape will be formed. Open these flaps putting a little pressure inside these triangles opening them as well, so that a hut kind of shape is formed. A flap in the middle will be created, push this flap upwards, fold this in half, on upper half part draw the keys of the piano. Close the halves of the ends of the hut shapes to secure the keys of your piano and its done. Please refer to the images for better clarity of the instructions. Your piano is ready!!
Now, a chair will be needed so that it could be played comfortably.

Chair

20210329_011506.jpg
20210329_011330.jpg
20210329_011209.jpg
20210329_011112.jpg
20210329_011048.jpg
20210329_010947.jpg
20210329_010916.jpg
20210329_010849.jpg
20210329_010817.jpg
20210329_010749.jpg
Take an origami sheet fold it in half vertically, make another fold by folding the formed flaps towards the formed crease such that the sheet is divided into 4 equal vertical strips, remove one strip as it won't be required. Now fold rest of the sheet into horizontal half and rest of the steps are same as done in the piano fold, making the triangular fold opening it into a hut shaped fold then folding the middle formed flap upwards which will form the seat of the chair and securing it by closing the half hut shaped flaps at the ends.
Voila!!
The chair is ready.

Putting Them Together

20210329_010250.jpg
Take the piano and put it closer to the chair or vise-a-versa.
The set is complete now. Enjoy!!