Organizer
Simple and convenient organizer made of improvised materials
Take a Clean Empty Jar:
1. Take a clean empty jar.
Measure the Dimensions:
2. Measure the dimensions.
Make Preliminary Calculations:
3. Make preliminary calculations.
4. Marking out the template for cardboard partitions.
Make Partition Inserts :
5. Make partition inserts.
Cut Cardboard Disks According to the Diameter of the Bottom of the Jar:
6. Cut cardboard disks according to the diameter of the bottom of the jar.
Glue Several Disks on the Outside of the Jar, So That the Last Disk Protrudes Beyond the Metal Edge:
7. Glue several disks on the outside of the jar, so that the last disk protrudes beyond the metal edge.
On Top of Cardboard Disks Glue a Felt Patch:
8. On top of cardboard disks glue a felt patch.
For Reliable Fixing of a Felt Patch, We Cut It in a Slightly Bigger Diameter and We Wrap the Edge Over a Metal Sides of the Jar:
9. For reliable fixing of a felt patch, we cut it in a slightly bigger diameter and we wrap the edge over a metal sides of the jar.
One of the Cardboard Disks Generously, in Several Layers, Pasted With Scraps of Felt on Both Sides and Put on the Bottom of the Jar:
10. One of the cardboard disks generously, in several layers, pasted with scraps of felt on both sides and put on the bottom of the jar.
Insert the Partitions Into the Jar:
11. Insert the partitions into the jar.
Partitions Are Leveled and Glued Together:
12. Partitions are leveled and glued together.
After the Glue Dries, You Can Start Using the Organizer:
13. After the glue dries, you can start using the organizer.