Nerf Jolt Mod(Byte TH-1)
Hello, I'm back again, this time with a Nerf mod that I named the Byte TH-1
(TH is my name abbreviated)
(TH is my name abbreviated)
NerfRocketeer's Rubber Band Mod
Take 4 rubber bands and strap them from the top of the Jolt to the bottom.
Cosmetic(optional)
Take paint and a brush and brush over the parts of It that you want black.
You can use other paints as well.
You can use other paints as well.
Internal Mod
You need to take the rubber bands off and unscrew the 4 screws on the bottom.
From there, you electrical or normal tape over the o-ring and then insert back in and screw in again.
The reason I needed so much instructions is cuz no pictures I don't feel like taking out the plunger again.
From there, you electrical or normal tape over the o-ring and then insert back in and screw in again.
The reason I needed so much instructions is cuz no pictures I don't feel like taking out the plunger again.
Done!
There is my simple(simple without external mods that probably hardest part) nerf jolt mod! Hope you enjoyed, and keep on nerfing.