Multi-Purpose Grapple

by sasuke31 in Outside > Climbing

7309 Views, 12 Favorites, 0 Comments

Multi-Purpose Grapple

C:\Documents and Settings\Owner\My Documents\My Pictures\2007-07 (Jul)\HPIM1701.JPG
This is a Multi-Purpose Grapple used for to extend fan switch pulls strings...For little army toys as a rock climbing toy...For fishing with little fish.

Gathering Supplies

C:\Documents and Settings\Owner\My Documents\My Pictures\2007-07 (Jul)\HPIM1693.JPG
First you will need 4 Paper clips. One long string and a Rubber Band and Scotch Tape.

Bend the paper clips as shown below.

Assembling the Paper Clips

C:\Documents and Settings\Owner\My Documents\My Pictures\2007-07 (Jul)\HPIM1695.JPG
Place the paper clips back to backs and add the other one in the middle as shown below.

Attaching the Rubber Band

C:\Documents and Settings\Owner\My Documents\My Pictures\2007-07 (Jul)\HPIM1696.JPG
This is how you attach the Paper Clips together by placing a rubber band around them.

Assembling the Extra Paper Clip

C:\Documents and Settings\Owner\My Documents\My Pictures\2007-07 (Jul)\HPIM1699.JPG
The 4th Paper clip is slightly bent and you shove it down in behind the rubber band.

Attaching a String and the Nail

C:\Documents and Settings\Owner\My Documents\My Pictures\2007-07 (Jul)\HPIM1703.JPG
This step you slide the string through the little hoop on the last or 4th paper clip. You tie a knot to the paper clip. Then put the nail on the opposite end of the string and wrap it on and tape it.