Motorcycle Slip-on Exhaust Installation

In this instructable video, I will show you how I installed my slip-on exhaust on my Honda CBR250R motorcycle. Installation took about an hour and a half which includes exploratory surgery and messing with my cameras. Otherwise, if I were to do this all over again, it would only take 15 minutes.

Tools:

1. WD-40
2. ratchet
3. ratchet extensions
4. 10 and 12 mm socket
5. allen wrench
6. adjustable wrench

The sound was exactly what I was looking for in the longer 450 mm Delkevic exhaust whereas a shorter version would have been louder. It was not as loud as a shorter exhaust, had a nice low rumble, and not at all obnoxious.

I hope this installation video would help those interested in installing a similar product.

Source: http://www.brownbrady.com/video_listing/slip-on-ex...