Monsoon Mosquito Control - DIY Ovitraps to Reduce Mosquito Populations

by Rustickraft in Outside > Camping

1253 Views, 15 Favorites, 0 Comments

Monsoon Mosquito Control - DIY Ovitraps to Reduce Mosquito Populations

paper mache (3).jpg
Make A Simple And Effective Mosquito Trap 🦟

As the monsoon season arrives, so do the unwelcome mosquitoes that thrive in wet conditions. To combat this seasonal nuisance, we've created a simple yet effective outdoor project: DIY ovitraps. These traps are designed to interrupt the mosquito life cycle by targeting their breeding sites, helping to significantly reduce mosquito populations. Using everyday items like candy jars and window mesh, these traps are easy to assemble and can be deployed on a large scale to protect your home and surroundings. This project not only offers a practical solution for mosquito control but also contributes to a healthier, more comfortable outdoor environment during the rainy season.

Supplies

  1. Candy jars
  2. Mosquito mesh
  3. GI wires
  4. Sunboard

Container Cutting

IMG20240802113337.jpg
IMG20240802113350.jpg
IMG20240802113430.jpg
IMG20240802113510.jpg
  1. The candy jar has been marked from its neck and cut into 2 pieces.
  2. Each piece will be needed, so none of them were discarded.

Fixing the Net

IMG20240802120435.jpg
IMG20240802120437.jpg
IMG20240802120443.jpg
IMG20240802122134.jpg
IMG20240802122323.jpg
IMG20240802125229.jpg
  1. Use the jar's cap as base.
  2. Mark and cut a circle of net.
  3. Make a circular sunboard ring to act as a frame.
  4. Glue the mosquito net with the circular frame, and then glue the net-frame on the jar's opening.

Assembling

IMG20240802125234.jpg
IMG20240802125235.jpg
IMG20240802125249.jpg
IMG20240802125340.jpg
IMG20240802125440.jpg
IMG20240802125445.jpg
  1. Put the jar's upper half up-side down in the lower half.
  2. Super glue the attached ends.
  3. Tape the fitted area to secure.

Water Level Management & Adding GI

VID20240802125225.00_00_05_26.Still016.jpg
VID20240802125225.00_00_08_18.Still017.jpg
VID20240802125225.00_00_54_47.Still019.jpg
VID20240802125225.00_01_04_16.Still020.jpg
VID20240802125225.00_01_11_48.Still021.jpg
VID20240802125225.00_01_26_56.Still022.jpg
VID20240802125225.00_01_36_24.Still024.jpg
VID20240802125225.00_01_46_47.Still023.jpg
VID20240802125225.00_03_10_01.Still025.jpg
  1. After taping, make 2 holes on sides. These holes will be adjacent to the net/mesh's brim. These holes will ensure to maintain the water level. The water must be leveled with the net so that excess water from rain will pass and still mosquitos can lay eggs sitting on the net.
  2. After the holes for water levels were made, 2 more holes were made to hang the trap. GI wires were fixed onto these two holes.

Placing It

VID20240802125225.00_00_27_17.Still030.jpg
VID20240802125225.00_01_21_17.Still028.jpg
VID20240802125225.00_00_55_13.Still026.jpg
VID20240802125225.00_01_00_09.Still027.jpg
  1. I made 4 of these traps and placed around our home.
  2. After 7 days I could see 2 of the traps having mosquito larvae. This suggested that the trap is working.
  3. I kept an watch for few more days and saw the larvae transforming into pupae and then into mosquitos.
  4. The hatched mosquitoes couldn't come out from the trap.
  5. I threw the water and kept the trap under sunlight for a day and again filled with water and deployed them.

The DIY ovitrap project demonstrates how simple materials can be used to create a powerful tool in the fight against mosquitoes. By targeting the breeding sites, these traps help cut down on mosquito populations, providing a safer and more enjoyable outdoor space during the monsoon. This project is a testament to how small, thoughtful interventions can have a significant impact on public health and comfort. As we continue to face challenges from mosquito-borne diseases, such innovative and accessible solutions are more important than ever. By making and using these ovitraps, you can play a direct role in protecting your community from mosquitoes and their associated risks.

Conclusion