Minute Clock Planner
Name: 9B 吳季芸 Kiwin Wu
Project name: Minute Clock Planner
Description of the project:
The function of this project is to maintain your working time. This could remind you how much time did you spent on your work or this could work as an alarm. This could especially benefit people who need to be kept away from their phone to concentrate. This prevents you from pick up your phone and start to message your friends, watch videos, play games or shopping. The original setting is to let the clock ring after 1 hr which is 60 mins on the clock, but you could arrange it according to the length of your work.
Supplies
Stepper motor
Wires
Breadboard
Arduino Leonardo
Buzzer
Hard cardboard
Markers
Papers
Minute hand (like the ones on the clock)
Ruler
Cut the Hardboard Into a Circle With a Radius of 8.5cm
Divide the Circle Into 12 Fan-shaped With a Ruler and a Pen, Remember All the Spaces Have to Be the Equal Length.
Then Use the Pen to Pierce Through the Middle of the Circle.
Label All of the Numbers Onto a Paper Than Stick Them Onto the Clock
A/N: Because it is a minuinte clock, so the first number will be 0 then 5, 10, 25...etc.
Put the Cardboard and the Minute Hand Onto the Stepper Motor
Stick the Hook and Loop Onto the Clock Then Make Multiple of Those.
Write Down Plans on the Paper and Stick Them on the Hook and Loop Tape
Suggestions: For example, reading, homework, piano, running...etc, what you do most in your daily life
Write the Code for the Clock (click the Link)
Start to Connect Wires on Stepper Motor and the Buzzer (the Picture of the Circuit Diagram)
