Mini Test Hooks

Well Guys/Gals   Here I Have a Set of Mini Test Hooks. To use with  A Multimeter. Sometimes its hard to get to Small places.

All you need is Two Mini Hooks. $1.20 Each

One Set of Alligator Clips 30 Cents.

1st Dismantle Clips, Pull Back on the base and the metal bit will come out, its Bend  so unbend it...

2nd   Pull out the spring  and the metal Bit from the Cap.

3rd   Drill a hole on top of the Cap.

4th   Cut Alligator Cord in Half. Now you have two.

5th  Remove Plastic Cover from The Clip.  Get a Small Piece of Heat Shrink and  Cover the base of the Alligator Clip. see picture.
Do the same to the other  Mini Hook.

6th  Get one end of the Cut Wire And Put it Through The Hole On Top of Cap So the Wire is On the Inside.
7th   Solder Wire to metal Bit. See pictures
8.      Re installed the Plastic Cover on the Alligator Clip. Get a Piece of Heat Shrink to put at the end of Plastic Cover,This way it will not  move Back.
9.   Put Together The Mini Hook... Metal Bit Goes inside Cap ,next The Spring, Last The Tip. and  Bend the tip.

REPEAT STEPS   FOR THE SECOND UNIT 

And Presto Go Measure Something.

I Will be Making Them Longer. At least 15 inches Long.