Mini 360 Photo Booth

This project was a great fun at my daughter's birthday party. The finishing isn't very aesthetic, but I had very little time. Perhaps in the future it will be prettier. For now, it fulfills its purpose.

In addition to the items listed below, you will need screws, bolts, and various other workshop materials.

Most important parts of the project are:

1. Old swivel chair
2. Ball bearing
3. Car phone holder
4. Black spray paint
5. OSB Board

Remove all unnecessary parts of chair. Everything that must remain are the legs, the actuator, and the seat support.

Lock the actuator so that it does not rotate and mount the bearing on the chair's armrest.

Mount the phone holder arm on the bearing, along with the counterweight attachment. Both components need to be balanced to rotate freely.

Cut a circle out of OSB board and screw it centrally to the seat of the chair. Cut and screw wooden legs to ensure stability.

Add brackets to the arm with a phone holder to make the arm more stable and prevent it from wobbling up and down.

Paint the whole thing.

Download an app for operating a 360 photo booth on your phone. I used Chack Tok app.