MineCraft Creeper Alarm Clock

This is a mine craft alarm clock modeled after a creeper.
it took about 5 hours to create and is fully functional.
and i hope that you will like it.

Things you will need:

*Cheap alarm clock
*Tape measurer
*Hole puncher/circle stamp
*Small speaker
*Cardboard
*Tape
*Paper cutter
*Hot glue and glue gun
*Printer

Please rate if you like it. thnx

The Head.

First you need to cut out (6) 4"x4" squares of cardboard
make sure to get them all even so the head is perfectly square.

The Body

Now you need to cut out (2) 2"x6" Rectangles
Next you need to cut out (2) 4"x6" Rectangles

They should look like the ones in the photo below.

Now in one of the 4"x6" Rectangles hole punch a
hole big eough for your speaker.

The Feet.

Lastly you need to cut out (4) 2"x2" cardboard squares
And cut out (8) 4"x2" cardboard rectangles.

again make sure they match up. you do not want him to be oddly shaped .

Creeper Skin.

Now you need to print out 5 of the creeper textures
and one of the creeper heads.

the files are attached below.

Downloads

Creeper skin images.rar

Apply Creeper Skin

Cut out pieces of the creeper skin And either tape or glue
them to the cardboard cutouts

then cutout the face and attach it to one of the face pieces

Put the Head Together

Now align the head like in the picture below and apply tape connecting them all together.
And then tape the head all together.

P.S. if you want to fill it for extra strength

Putting the Body Together

First take your speaker and glue t to the back of the chest cutout

then take apart your alarm clock

Cut the wires of the speaker and cut the ends so the wires are showing

Next cut out the rectangle for the display screen

you can put a frame around it like i did to make it look cleaner

then attach the wire to your speaker you glued on (red to red white to white)

now cutout the area for the buttons

and place a cardboard strip behind the circuit board to hold it in place

now attach the buttons

then tape on the other sides of the body and glue them into place

Then glue on the head

Feet Assembly

Now put he feet together in rectangles
Then glue them on as in the picture

Now you have your very own creeper alarm clock